With Mobile Broadband Router ZTE MF91D, you can connect 5 computers / wireless devices simultaneously. Here you will find information and guidance on how to set up and use the Wireless Mobile Broadband Router ZTE MF91D.

Get Started of ZTE MF91D:

Network name (SSID) and network key (WIFI KEY) can be found on the underside of the router on a sticker.

1. Insert the SIM card.
2. Turn on the router by holding the On / Off button for several seconds.
3. Click the wireless network icon on your computer.
4. Select Connect to a network / List available networks.
5. Click on your network (SSID), select Connect.
6. Enter the network key (KEY WIFI), press Connect.
7. Open a web browser such as Internet Explorer and follow the wizard. We recommend creating your own wireless network name and password. After a few steps, enter a URL such as www.4gltemall.com

Here you can see the list of ZTE 4G WiFi routers including ZTE Stationary 4G Router, ZTE Mobile 4G Router, ZTE LTE Mobile Hotspot. And the in the list, the ZTE LTE routers LTE category, model type, prices, specs, reviews, manual, chipsets and other technical features available in the ZTE 4G WiFi.

You are now connected to the Internet.

Verizon Zte Cymbal Lte Manual

Getting into the menu of the MF91D router:

The router has a separate menu, where you will change the wireless network name and network key.

Getting into the menu of the router:

1. Open a new browser such as Internet Explorer on a computer connected to the router. Enter 192.168.1.1 in the address field and press Enter.
2. Enter Password: admin

Now you could change the password per your preference.

Restoring factory settings (reset) router:

If you experience problems connecting to the Internet, it may help to reset the router.

To reset the MF91D manually:

1. Open the router.
2. Press a paper clip / pin in the reset hole and hold for 10 seconds.
3. The router turns on and off, and you can connect to the wireless network.

Now, after you reset the router, the network name and network password would be reset.

How to restore ZTE MF91D factory default:

1. Open a new browser such as Internet Explorer on a computer connected to the router. Enter 192.168.1.1 in the address field and press Enter.
2. Enter Password: admin
3. Click Settings
4. Select System Security then Default Settings.
5. Press Restore
6. Click Restore again to confirm.
7. The router automatically turns on, and you can reconnect. Note that after you have reset the router, the network name and network password be reset. Have you changed the login password of the router, this is also reset.

Change the wireless channel:

Do you have low signal strength or difficulty finding the wireless network; it may help to change the wireless channel.

To change the wireless channel, you must enter the menu of the router. The computer must be connected wirelessly to the router to access the menu.

1. Open a new browser such as Internet Explorer on a computer connected to the router. Enter 192.168.1.1 in the address field and press Enter.
2. Enter Password : admin
3. Select Settings
4. Click Wi-Fi, then Advanced
5. Select a channel from the dropdown below Frequency (Channel).

It is recommended to choose 1, 6 or 11. The channel 11 may work better than channel 1 in your home, so take your pick. Avoid channels 12 or 13 when some network cannot connect to them.

1. Press Use. The settings are now saved.
2. If you experience the same problem remains, repeat step 4 and try another channel that might work better on your computer.
3. If you cannot find your wireless network, you should reboot the PC and router.

Switch between 4G, 3G and 2G networks

To do this:

1. Open a new browser such as Internet Explorer on a computer connected to the router. Enter 192.168.1.1 in the address field and press Enter.
2. Enter Password: admin
3. Select Settings, then Network
4. Select Only 3G or only 2G from the drop down menu under Select Network.
5. Press Use.

Zte Mobile Hotspot Manual

Here you can find the default IP address and the predefined access data for the user interface of the MF910 Mobile WLAN LTE router of ZTE. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

Preconfigured Wi-Fi settings

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the ZTE MF910, you have to do the following steps for access:

1. Turn on router
2. Set up a connection between the device and the router via Wi-Fi*
3. Start web browser
4. Enter URL or IP address in the address bar and confirm with ‘Enter’ key
5. Enter password in the open user interface and confirm again

* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the ZTE MF910 to its default settings, you have to do the following steps:

1. Switch on router
2. Press and hold the Reset button until the router’s RESET LED flashes
3. Device is automatically restarted
4. Default settings have been restored

Execute software reset

With the ZTE MF910, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.